Multiport Fittings
Components
Body
NS-ZPR
The most essential part for assembling multiport fittings. Two pieces form one multiport. Body is delivered with TX20 screws.
Body blank flange
NS-NT0
This part serves to cover enter on a body. Blank flange forms an airtight connection thanks to a thread. No sealing materials are required.
Bayonet single-row 90
NS-F19
Basic element for a single-row multiport fitting and 90mm diagram duct.
Covering bayonet single-row
NS-F10
Forms a blocking wall in a single-row multiport fitting.
Connecting part for single-row multiports
NS-ST1
Connect single-row multiport fittings horizontally to create a bigger multiport fitting according to your needs.
Bayonet double-row 90
NS-F29
Basic element for a connection of a double-row multiport fitting and a Flex 90 duct.
Covering bayonet double-row
NS-F20
Forms a blocking wall in a double-row multiport fitting.
Connecting Part for a double-row multiport
NS-ST2
Connect double-row multiport fittings horizontally to create a bigger multiport fitting according to your needs.
Additional blank flange for bayonets
NS-FZ9
For additional cover of a single-row F19 or a double-row F29 bayonets.
Connecting Part
NS-T2M
Connecting part for a double-row multiport fitting. Four pieces required for one multiport fitting. Connecting parts are delivered with TX20 screws.
Flange for a body 125mm
NS-NTP-125
For bottom or upper connection of the main duct with a 125mm diameter. Suitable for fixed or flexible ducts.
Flange for a body 160mm
NS-NTP-160
For bottom or upper connection of the main duct with a 160mm diameter. Suitable for fixed or flexible ducts.
Flange for a Body
NS-NTP-200
For bottom or upper connection of the main duct with a 200mm diameter. Suitable for fixed or flexible ducts.
Single-row flange 125mm
with linear connection
NS-N1P-125
Bent-shaped flange for single-row multiport fittings with linear connection. Suitable for 125mm diagram fixed or flexible ducts.
Single-row flange 160mm with Linear connection
NS-N1P-160
Bent-shaped flange for single-row multiport fittings with linear connection. Suitable for 160mm diagram fixed or flexible ducts.
Double-row flange 125mm with linear connection
NS-N2P-125
Bent-shaped flange for double-row multiport fittings with linear connection. Suitable for fixed or flexible 125mm diagram ducts.
Double-row flange 160mm with linear connection
NS-N2P-160
Bent-shaped flange for double-row multiport fittings with linear connection. Suitable for fixed or flexible 160mm diagram ducts.
Double-row flange 200mm with Linear connection
NS-N2P-200
Bent-shaped flange for double-row multiport fittings with linear connection. Suitable for 200mm diagram fixed or flexible ducts.